Enterprise Solutions
Enterprise computing and networking applications demand superior connectivity solutions. Online Cable Store offers a wide variety of solutions to support the exacting demands of enterprise applications. From standard single-mode and multimode fiber patch cables to custom, plenum rated LOMMF pre-terminations, we have the products and services to support virtually every enterprise connectivity need. Online Cable Store also offers a wide array of copper-based solutions, including Cat5e/Cat6 cables, plenum rated VGA cables and KVM cables. These cables compliment our line of enterprise hardware solutions, including Minicom enterprise KVMs and video distribution systems. Custom Fiber Solutions- With no fiber preparation, termination kits or specialized termination training required, Custom Fiber Solutions can save installers time and money
- Pulling eyes, identification labels and spooled solutions reduce the amount of installation time
- Improved optical performance
- Cables are fully tested and ready for installation
- Factory terminated connectors provide improved end-to-end performance
- Custom Fiber Solutions can reduce waste caused by improper field termination
- Reduce the overhead required to outfit field installers with multiple types of fiber, connectors and tools
- Custom pre-terminated fiber solutions ship in as little as three business days.
Custom Fiber Options Include
- 62.5/125 and 50/125 Multimode Fiber
- 10 Gigabit Laser Optimized 50/125 Multimode Fiber (LOMMF)
- 9/125 Single-Mode Fiber
- Mode Conditioning Patch Cables
- Multi-Fiber Solutions (Pre-terms)
- MTP Trunk and Break-Out Cables
- Custom Solutions for Plenum, Low-Smoke Zero Halogen, Direct Burial and Overhead applications
- ST, SC, LC, FC, MTRJ, Escon, MTP connectors and more
- Identification labels
- Pulling eyes
- Installer-friendly spools for faster and easier installation
- M.L. spec also are available
Fiber Count & Construction- 1-288 Strands
- Simplex Cable
- Duplex Zipcord
Jacket Types
- PVC - Also referred to as OFNR; for use in riser applications
- Plenum - Also referred to as OFNP; for use in air spaces (plenums); when exposed to extreme heat or flames these cables do not emit toxic chlorine gases; this designation is required by the NEC to be stamped on all cable jackets that meet this rating
- Other - LSZH, Armored Direct Burial
Custom Fiber Patch Cable Configuration Made Easy
Online Cable Store makes it easy for installers to configure basic fiber patch cables. Here's a list of common questions we ask our customers: Select Fiber Type
- 9/125 Single-Mode
- 50/125 Multimode
- 50/125 Laser Optimized Multimode
- 62.5/125 Multimode
Select Jacket Type
- PVC
- Plenum
- Low Smoke Zero Halogen (LSZH)
Select Strand Count
- Simplex (1)
- Duplex (2)
- Multiple Strands
Select the connectors* for each end of cable *LC, MTRJ, SC, ST Note: Additional connector styles available - please inquire
Length
- Typically in meters, but can be constructed in feet
|
|
|
Many different connector types exist for fiber optic cabling and
electronics of today’s high tech networks. It is not always necessary
to match identical connector types on both ends of the cable;
instead, the connectors on the cable should match the inputs/outputs
of the electronics being connected. Some of the most common
connections found in networking applications are: ST, SC, LC and
MTRJ. The ST connection, an acronym for “straight tip”, is a round
bayonet-locking connector which resembles the BNC connector used on
audio/video devices. The SC connection, an acronym for “subscriber
connector”, is a square shaped connection with a push/pull locking
mechanism. The SC interface is still popular in a lot of today’s datacomm
applications. The LC connection, an acronym for “Lucent connector”,
is half the size of an SC connection and uses a locking tab to hold
the connector in place. LC is growing in popularity and can be found on
network electronics that are manufactured today. The MTRJ connection, an
acronym for “mechanical transfer registered jack” combines duplex fibers
into a single connector providing a single convenient connection. MTRJ
uses a locking tab method similar to LC connectors by using a single
plastic locking tab to hold the connector in place.
|
|
|
